AS3200V2 Hardware Manual
(2) Insert AS3200V2 vertically into PCI slot from one side to the other and then
insert AudExt3 and ConExt1616 in the same way. Check if the cards were well
inserted into PCI slot.
<AS3200V2, AudExt3 and ConExt1616 Inserted into PCI Slot>
(3) Connect a pin of watchdog 2pin connector of AS3200V2 to the reset switch of
mother board by 2pin cable. And then connect the other pin of watchdog 2pin
connector to the reset cable of PC case. Hardware installation of capture card
finished.
<Watchdog Pin Connected to Reset Pin of Mother Board>
2004-04-02
www.alnetsystems.com
11
