S.G. Elettronica S.r.l
-
Via E. Ferrari , 28
-
30037 Scorzè (VE) Italy
-
Tel +39 041 5841973 Fax +39 041 5841979
-
www.almot.it
-
WARNING: READ CAREFULLY THE FOLLOWING SAFETY INDICATIONS BEFORE TO START THE INSTALLATION OF
THIS DEVICE; THEY ARE USEFUL TO PREVENT ANY ELECTRICAL CONTACT, INJURY AND OTHER PROBLEMS. KEEP
THIS MANUAL FOR OTHER CONSULTATIONS.
·
The control units for the Vasistas are intended exclusively to the control of the weather for the automatic
movement of the windows. The use for applications which are different from the ones indicated must be au-
thorized by the manufacturer, after the technical test of the application.
·
After having removed the packaging, check that the device is intact. Plastic bags, styrofoam, small metallic
components as nails, clips, etc. have to be kept out of reach of children, because they might be dangerous.
·
Before to connect the device, verify that the electrical supply that you use, has the same features indicated in
the label with the technical infos, applied on the device.
·
The installation of the device has to be made according to the instructions of the manufacturer. Non
-
compliance with these rules can compromise the safety.
·
The implementation of the electrical installation of voltage supply has to be made according to the current
rules.
·
To avoid any danger of injuries or death caused by the voltage supply, before implementing any operation of
wiring or regulation, turn off the voltage from the supply line.
·
To assure an effective separation from the net we suggest to install a momentary bipolar switch (button) ap-
proved. At the beginning of the command line a general omnipolar switch of supply with input of the contact
of at least 3,5 mm, must be installed.
·
It is necessary to use material of connection fit to guarantee an isolation according to the actual normative on
the electric safety.
·
Don’t clean or wash the device with solvent or jets of water. Do not immerse into water.
·
Warning
: in case of damage or malfunction, turn off the device from the general switch and call a qualified
technician.
·
Every repair have to be implemented only by qualified staff in an help centre authorized by the manufacturer.
·
Before implementing any operation of cleaning or maintenance, be sure to disconnect the device from the
net. For further safety we suggest to remove the electrical connection.
·
Request always and exclusively the use of original replacements. The non
-
compliance with this rule could
compromise the safety and undo the benefits of the warranty applied on the device.
·
In case of problems or doubts during the intallation of the functioning, address to your retailer of
trust or directly to the manufacturer.
1. INSTRUCTIONS FOR THE SAFETY
2.0 WASTE DISPOSAL
This product is integral part of the automation, and therefore you/he/she must be digests together with it.
As for the operations of installation, also at the end of the life of this product, the operations of dismantlement
must be perform from personal qualified.
This product is constituted by various types of materials: some can be recycled, others must be digest. Inform you
on the systems of recycling or disposal anticipated from the in force rules on your territory, for this category of pro-
duct.
Attention!
Some parts of the product can contain polluting or dangerous substances that, if dispersed in
the environment, you/they could provoke harmful effects on the same environment and on the human
As pointed out by the side symbol, it is forbidden to throw this product in the domestic refusals. To perform therefo-
re her "separate harvest" for the disposal, according to the anticipated methods from the in force rules on your ter-
ritory, or to redeliver the product to the seller in the moment of the purchase of a new equivalent product.
Attention!
The in force rules to local level can foresee heavy sanctions in case of unauthorized disposal of this pro-
duct.
