9b. Place the clear rubber gasket onto the flat side of all four hinge components, being sure the holes of the gasket line up with the holes for the
bolts (Images 54 & 55).
Rest the lower hinge on the lower pivot (Images 56 & 57) With a helper holding the door, align the lower holes in the glass up to the lower hinge,
position the back plate over the glass and join the three components by lightly tightening the bolts into the hinge (Images 58 & 59) Do not
completely tighten bolts into the hinge yet.
While your helper continues to hold the door, place the upper hinge on its pivot and support it while you line up the door, place the back-plate
and join them all together by lightly tightening the bolts into the hinge (Images 60 & 61)
9c. Install the door handle with the wood handle inside the sauna. Install pieces as they are laid out in Image 62. (Images 63 & 64)
Image 54
Image 55
Image 56
Image 57
Image 58
Image 59
Image 60
Image 61
Image 62
Image 63 Image 64
SPECTRUM SAUNA INSTALLATION MANUAL
page 6
