Selection of further meas. points with key:
MESSEN
HOLD
MIN
MAX
CORR
M
DIM
If the measuring range changes when switching over, the abbreviation of the
measuring range is indicated for a short time (s. 6.1). In case of a sensor
breakage the abbreviation flashes instead of the measured value:
Display measuring range:
HOLD
MIN
MAX
CORR
M
DIM
If the actual measured value has been changed by scaling or correction values
(see man. 6.3.10/11) the arrow ´
CORR
´ will be indicated on the display.
If the difference to a reference value is indicated for a short time, the arrow
´
CORR
´ will flash (see 7.4).
7.2 Maximum and Minimum Values
The maximum and the minimum value are always determined among the
current measured values of a measuring point and are stored. For displaying
the peak values the required channel must be selected (see 7.1) and the key
MAX
or
MIN
must be pressed. For control purposes an arrow will be indicated
under the corresponding symbols.
Function MAX VALUE
Selection of max value with key:
MAX
HOLD
MIN
MAX
CORR
M
DIM
Function MIN VALUE
Selection of min value with key:
MIN
HOLD
MIN
MAX
CORR
M
DIM
Clear max/min values with key:
LÖSCHEN
Return to the meas. value with key:
MESSEN
ALMEMO
2190-2
17
Measurement
