Almaco SPC 20, Operator'S Manual, Page: 15 / 76

SPC 20 OPERATOR’S MANUAL
SAFETY B-3
GENERAL SAFETY
Every year, many accidents occur which could have been avoided by a few seconds of thought and a safer approach
to handling farm machinery and implements.
Designers build in as many safety features as possible, such as safety shields for belts, chains and sprockets, etc.,
but the designer cannot guarantee safety. Safety is up to the operator. These general safety precautions and the
safety decals on the machine are intended to help avoid accidents and create a safe working environment.
RECOGNIZE SAFETY INFORMATION
This is the safety-alert symbol. When you
see this symbol on your machine or in this
manual, be alert to the potential for personal
injury.
Follow recommended precautions and safe
operating practices.
UNDERSTAND SIGNAL WORDS
DANGER: Indicates an imminently
hazardous situation that, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation that, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation that, if not avoided, may
result in minor or moderate injury.
FOLLOW SAFETY INSTRUCTIONS
Carefully read all safety messages in this
manual and safety decals on your machine.
Keep all decals in good condition and
replace any that are missing or damaged.
New decals are available from ALMACO,
refer to
Safety Decal Locations later in this
section for ordering information. Be sure
new equipment, components and repair
parts display all required safety decals.