PAGE
82
ALMAC s.r.l.
6.2.7.1
Suction filters replacement
To replace the intake filters located inside the hydraulic tank, proceed as
follows:
1)
Remove the central filling platform;
2)
Empty the hydraulic oil tank;
3)
Unscrew the blocking screws (1) on the hydraulic tank lid and remove it
from its housing;
4)
Remove filter (2) and replace it with a new one;
5)
Work through the instructions above in reverse order to restore the
machine to its normal operating conditions;
6)
Seal the lid with sealing paste;
7)
Fill the hydraulic oil reservoir with oil and check the level.
6.2.7.2
Replacing the discharge filter
To replace the discharge filter located above the hydraulic tank, proceed as
follows:
1)
Remove the central filling platform;
2)
Unscrew the blocking screws (
1
) on the filter and remove it from its
housing;
3)
Unscrew the filter cartridge (
2
), being careful with the seals and/or O-
rings;
4)
Remove the cartridge (
3
) and fit a new one in its place;
5)
Work through the instructions above in reverse order to restore the
machine to its normal operating conditions.
2
2
1
Summary of Contents for MULTI-LOADER 6.0
