POWERFLEX G2426 Managed GbE PoE Switch
Quick Installation and Initial Configuration Guide
Page 12
Toll Free 1-866-
ALLWORX • 585
-421-
3850
www.allworx.com
Version: A Revised:
August 16, 2017
5.
Run your Web browser on the PC, enter the factory default IP
address, so as to access the switch’s Web interface.
If your PC is configured correctly, you will see the login page of the switch
as shown by Figure 9 below.
Figure 9: Web Interface login page
If you do not see the above login page, please perform the following
steps:
- Refresh the web page.
- Check to see if there is an IP conflict issue.
- Clean browser cookies and temporary internet files.
- Check your PC settings again and repeat step 2.
6.
Enter the factory default username and password in login page.
Click “Login” to log into the switch.
Note:
The factory default Username of the switch is
admin
.
The factory default Password of the switch is
admin
.