5EN
BASIC CONNECTIONS
●
Ensure all the cables are connected to the main unit before connecting it to a socket.
●
Make sure all the equipment and power plugs are properly connected and the unit is set in a
correct mode before any kind of operation.
●
NOTE: Carefully read the site instructions before connecting the device to other equipment.
BASIC OPERATIONS
- Press the POWER button on the unit or remote control to power ON the unit (indicator will glow
blue); press it again to power OFF (standby mode) the unit (indicator will glow red).
- Press SOURCE button on the remote control to set the unit in DTV or ATV mode
.
- Certain actions require inserting a password (0000 – default, 8899 – universal)
VOLUME CONTROL, MUTE CONTROL
SOURCE SETTING, MULTI-AUDIO SETTING
INFORMATION DISPLAY, TV GUIDE (FOR DTV MODE ONLY), FAVORITE LIST
QUICK SELECT
,
TELETEXT
,
TV/RADIO (FOR DTV MODE ONLY)
,
SUBTITLE
RECORDER (FOR DTV MODE ONLY), TIME SHIFT (FOR DTV MODE ONLY)
SMART TV OPERATIONS
After completing the first installation steps, you have to connect to LAN or WiFi in order to have
internet access.
By using the MOUSE/IR button, you can access the MOUSE button and the NAVIGATION button
which allows you, with the help of the navigation buttons, to go through the menu and the
submenus.
You have an available browser, a file manager, an app manager and a specific Settings submenu.
MAIN MENU
●
The unit contains different setting modes. Once the initial programming is entered, it will remain
as such until changed. This way, the unit can always be operated under the same conditions.
●
The settings will remain as such until they are changed by the user, even if the TV enters in
standby mode.
DTV MODE
- Press the SOURCE button to switch the TV in DTV mode.
- You have the following submenus: channel, picture, sound, advanced
ATV AND OTHER MODES
-
Press SOURCE button on the remote control to select desired input source.
- For these modes, please refer to the user guide from the website.