35
To use
“HDMI Link” function:
- Make sure the HDMI device (amplifiers, etc.) is connected correctly and HDMI device must
support HDMI CEC (Consumer Electronics Control).
- Press the SOURCE button on the remote control to select HDMI as input source.
Enable HDMI Link:
turn on/off HDMI Link.
Auto Power on:
turn on/off Auto Power On function.
Auto Standby:
turn on/off Auto Standby function.
Speaker Preference:
select TV Speakers or Amplifier as a preference.
Amplifier Support ARC (HDMI 3):
turn on/off ARC function.
5. Setup
5.1 OSD Display
- Press OK or RIGHT buttons to enter the submenu and press UP/DOWN buttons to select
the preferred option.
Available options: 5/10/15/20/25/30 seconds and never.
5.2 Auto SCART
This item is used to turn on/off Auto SCART function. If Auto SCART is on, you can view the
programs by SCART automatically when the SCART cable is connected.
