Bedienungsanleitung
Operation manual
Notice d’utilisation
Instrucciones de servcio
Istruzioni per l’uso
www.alluris.de
Page 3 of 34
1.0 Safety precautions
The internal sensor (strain gauge) can be damaged if overloaded!
Mind your gauge model`s maximum measuring range! The maximum
measuring range is written on the front of the instrument and on the
back. Do not apply side or radial forces to the rigid measuring axle. Do
not use any tools to screw the attachement onto the measuring axle.
Always transport and store the instrument in its carrying case when
not in use. Thus, you will minimize the risk of damages caused by un-
meant detrimental mechanical effects, which, as the case may be, can
destroy the internal sensor.
Please consider the technical data in regard to the environmental
conditions
(see p. 30 chapter 7.0 Technical Data)
. The instrument
is equipped with a temperature compensation for 0°...40°C (max.
85%rF). Use the instrument in this temperature range only.
For test stand mounting please only use the fitting holes and the tap-
ped holes on the rear side of the instrument.
Force gauges are delivered in a carrying case. Especially devices for
small forces should always be stored and transported in this protec-
tive case, because the internal sensor may be harmed by bumps and
shocks.
Thank you for choosing one of our high quality instruments. Please
read the entire operation manual thoroughly before using this instru-
ment for the first time. The information contained herein will help you
to achieve accurate and reproducible results and to avoid misuse or
damages.
