User guide
13
THE EMBEDDED WEB INTERFACE
Even without the mobile app Shelly can be set and controlled
through a browser and connection of a mobile phone or tablet.
Abbreviations used
• Shelly-ID
– consists of 6 or more characters. It may include
numbers and letters, for example
35FA58.
• SSID
– the name of the WiFi network, created by the device,
for example
ShellyGas-35FA58.
•
Access Point (AP)
– in this mode in Shelly creates its own
WiFi network.
•
Client Mode (CM)
– in thismode in Shelly connects to anoth-
er WiFi network.
Installation/Initial inclusion
Step 1
Place Shelly into the power socket, in the room where you want
to use it. The device will make a self test, and in the first 3 min
-
utes the LED ring should turn in a sequence:
green->orange-
>red
. After the self test is finished, the LED ring should turn
green and the WiFi LED should be blinking, once per second.
This means that the device is calibrated and is in AP mode.
CAUTION!
If the WiFi LED is not blinking once per second, press
and hold the reset button for at least 10 seconds. The WiFi LED
should be blinking, once per second. If not, please repeat or
contact our customer support at:
Step 2
When WiFi LED is blinking once per second, Shelly has created
a WiFi network, with name such as
ShellyGas-35FA58
. Connect
to it.
Step 3
Type
192.168.33.1
into the address field of your browser to