3430399500
Page 8 of 10
Harvest Rustic Table: Non-Powered
Installation Packet
Note: If bow exists within aprons running lengthwise along table, correct with provided L-brackets.
1. Attach L-bracket to apron with (2) #10 Phillips head screws.
2. Push against apron in direction of bow; attach L-bracket to surface with (2) #12 wood screws.
External Stiffeners
1. Place first stiffener along row of anti-bow brackets, with one end 7/8“ from the apron. Attach
stiffener to surface with (2) #10 x 7/8 Hex head screws into outer-most holes of stiffener.
2. Place second stiffener along inside wall of fist stiffener, with end 7/8” from opposite apron than
the first stiffener. Attach with (2) #10 x 7/8 Hex head screws into outer-most holes.
3. Finish installing external stiffeners with (16) #10 x 7/8 Hex head screws.
4. Repeat steps 1-3 for 2 remaining stiffeners on other half of worksurface.
Hardware:
x40
Anti-Bow Brackets continued...
#10 Phillips
screws
#12 Wood
screws
Install outer
stiffeners first
Outermost screws
7/8” gap
from apron