14
Allstar 9931. Check the manufacturer’s instructions included with the
receiver. In general, if pin #1 is 24V, pin #2 is RELAY and pin #3 is
RADIO POWER, these instructions will apply.
If a 3 or 4-wire receiver is used, connect it according to the
manufacturer’s instructions. Terminal #1 on the 6-terminal strip is
COMMON and terminal #3 is 24 VOLTS AC.
If an Allstar 4-Wire receiver is used, follow the wiring plan illustrated
in Figure11
WIRING A KEYPAD OR TELEPHONE ENTRY
SYSTEM
Install according to the manufacturer's instructions.
Right Hand
Installation
Left Hand
Installation
Inside
Outsid
Inside
Outside
107033
Figure 15: Left Hand vs. Right Hand Installation
Figure 16: Left Hand Conversion — Harness & Wire Locations
103700
D
: STARTING THE OPERATOR
