All
SportSystems, Inc.
©
2020.
Step 2 - Build Bottom
●
Place the bottom rear width pole in the location where you desire the rear of your
hitting bay to be located. SuperBay™ enclosures should have extender poles already
attached to the width pole from the previous step.
Tip:
Always position the eye bolts
facing down and toward the inside of the enclosure.
●
Add two
3-Way corner
connectors to each end of the above width pole.
● Insert two
Bottom Depth
poles into the bottom rear 3-Way corners, one on each side.
● Add two L-Corner brackets, to the front end of the bottom depth poles, pointing
upward.
● This establishes the bottom of your frame.
●
Verify Dimensions:
Use a tape measure to verify correct width and depth dimensions
and then tighten all connectors. You may need to back the poles slightly out of the
connectors to reach the correct dimension.
Page 9 of 48
February 3, 2020
