All
SportSystems, Inc.
©
2021
SCREEN INSTALLATION
Step 5 - Install Cabling For Siderite™ Tension Kit
● On each side of the frame loop the SideRite™ cabling around the upper depth pole
and bottom leg. Position the cable to the front until it rests in the elbow of the top L
bracket. Loop the cable under the bottom leg.
● Attach the hook end of the turnbuckle to the other end of the cable. Tighten the cable
by twisting the turnbuckle causing the cable to shorten. The cable should have good
tension.
Page 12 of 25
Last Revised 12-18-2020
Note: The SideRite™ tension kit comes standard and will keep tension on your screen and waves
to a minimum. Cables first need to be assembled, See
APPENDIX A - SideRite™ Cable Assembly
After cable assembly, see the steps below to install the cables on the enclosure.
