P601 HART Series
- 8 -
4．Press down "Z" key again, you can set the second to the fifth number sequentially,
the way is as the same as the step 3.
5．After setting the fifth number, press down "Z" key to set the decimal point. Four
decimal points start to flash at the same time and you can set decimal point
position. Now, press down "S" key, the decimal point position change sequentially.
6．After setting decimal point, press down "Z" key, the left-down arrows flash, now you
can store your setting.
7．Press down "S" key to store setting; press down "Z" key, symbols bit begins to flash
and you can start the new setting programmed.
Notice: If it is the "three keys" operation, during the setting procedure, you can press
down "M" key at anytime to store setting quickly. If not, you have to wait for the next
down arrows lashing to store your settings.
5.3 Local Adjustment
5.3.1 data setting
In
local
adjustment,
LCD
left-down
"88"
will
show
setting
data
types,
the
corresponding relations:
Left-down "88"show
Setting data
0 or null
Normal display
1
Setting pass code
2
Setting units
3
Setting Range Down Limit
4
Setting Range Up Limit
5
Setting Damp
6
Adjusting Main volume to Zero
7
Zero and Span elevation
In the normal display state, press down "Z" key will enter the configuration data
setting, configuration