P601 HART Series
- 11 -
5.3.2 configuration data over looking
In the normal display state, press down "S" key can over look data quickly, the
looking order is as the same as data setting procedure Figures.
5.3.3 zero and span elevation
In the normal display state, press down "Z" and "S" key at the same time, then
entering the zero and span elevation state, the procedure see Figure 5-4.
Figure 5-4
6. Notice
1. Before operation, please read this operation manual very carefully, and make right
connection accordingly.
2. If no standard pressure source, please DO NOT calibrates the transmitter; if you have to
calibrate it, let a professional engineer do it.
3. DO NOT touch the diaphragm by your finger or a sharp tool, it will damage the sensor.
4. If the transmitter application site is near strong interfere, be sure the electronic housing
grounded well.