Digital Android Battery A-Board (Standalone) Hardware User Manual
Page 4
Quick Start Guide – Part 2. Updating the Display
Unpack unit and place in desired location.
1
Power the screen on using the rocker power switch on the rear of the unit, next to the charge
level indicator.
2
Collect the files you wish to display and make sure they are supported by the unit (see Section
2.1)
3
On a PC copy the files you want to play onto an empty USB drive. These should be in the root
directory (without putting them into a folder). Remove USB from PC.
4
Insert USB drive into the one of the USB ports located inside the locker of the unit (see Figure
1).
The screen should indicate that it is copying the files onto the unit. Please note that all files
currently stored in the unit will be deleted. Once completed, the screen will display a message
to remove the USB drive.
5
Remove the USB drive and the unit will reboot and play the stored files in a loop.
Figure 1 Position of Screen Inputs
