11
309887
Servicing V-Packings
NOTE:
There are two types of packing kits: One is
packings only. The other includes packings, o–rings
and retainers.
1. Remove the manifold as outlined in Pumping
Section on page 10.
2. Carefully pull packing retainer from manifold.
Examine o-ring and replace if cut or damaged.
3. Remove v-packing and head ring. Pull out interme-
diate retainer ring. Remove second v-packing and
second head ring.
4. Inspect all parts. Replace as necessary.
5. Thoroughly clean packing cavities. Examine for
debris or damage.
6. Lightly grease packing cavities. Replace packings
in the following order: head ring, v-packing, inter-
mediate ring, head ring, v-packing, packing retain-
er. Install o-ring in retainer groove.
CAUTION
Install parts in proper order and facing proper direc-
tion. Improperly installed parts will cause a malfunc-
tion.
7. Reassemble manifold as instructed in Servicing
Plungers on page 10.
