Under no circumstances operate this machine in an enclosed area as Carbon Monoxide fumes
produced by the engine can be lethal.
Avoid operating this machine over loose stones or gravel surface as debris may deflect from the
discharge area and result in personal injury or property damage.
Ensure mowing area is clear of loose objects that could be thrown by mower blades.
This product is equipped with an internal combustion type engine. DO NOT use unit on or near any
unimproved, forest-covered or brush covered land unless exhaust system is equipped with a spark
arrester meeting applicable local, state or federal laws. Fitment of an approved Spark Arrestor for a
particular area is at cost of, and is the responsibility of the operator. If a spark arrester is used, the
operator must maintain it in effective working order.
Before leaving or transporting the machine, ensure that the engine is turned off and that all moving
parts have come to a complete stop as the blades can continue to rotate for up to 10 seconds after
the engine has been turned off.
Turn off the engine:
- Before clearing blockages or eliminating clogging in the discharge chute.
- If excessive vibration is evident.
- Before refuelling, cleaning, checking, opening the discharge chute, emptying the catcher, fitting or
removing mulching baffle or performing maintenance of any kind.
The blade should be checked regularly for wear, damage and secure mounting. Ensure that all
screws and bolts are always firmly tightened.
Do not operate this machine with worn or damaged blades.
If blades strike an immoveable object, stop the engine and check for damage before proceeding.
Know your controls and learn how to stop the engine quickly in an emergency!
Safety Labels
Please observe all safety and warning labels as they are designed for your protection and for the
protection of the machine.
Failure to observe these safety labels may cause serious injury to the operator, bystanders or to the
machine.
Danger and warning labels that have become illegible must be replaced. Your authorised Allpower
Servicing Dealer can supply replacement labels.
Maintenance
Before attempting any maintenance on this machine, ensure the engine is switched OFF, all
moving parts have come to a complete stop and the spark plug lead is disconnected from the spark
plug.
Allow the engine to cool down if maintenance, refuelling, oil change or top-up is required.
Do not change the basic setting of, or over-rev the engine. Excessive speed can cause personal
injury, damage to the machine and will void the Engine Warranty.
If parts or safety guards have been removed for maintenance work, ensure that these are
remounted and secure before the next use.
Use only genuine Supaswift replacement parts. Use of non-genuine or modified components may
cause personal injury or damage to the machine.
Only carry out maintenance work described in these operating instructions. Contact your authorised
Allpower Servicing Dealer for all other work.
P a g e
| 4
