O Connect your air pipe (4mm internal diameter) to the AP'S outlet(s)
O Place the AP above water level on a flat surface if possible
(this will reduce noise levels)
O Connect a non return valve between your air hose a few inches from
the AP (image 1)
O Position your air pipe in your aquarium with or without air
stone as required
O Plug in the AP
O Using the dial on the back Of the unit you can choose what speed
the pump operates at
•
Regularly clean your air pipe and airstone (if in use) to ensure
maximum output and prolonged lifespan
•
ALWAYS use a non-return valve on your AP's outlet(s) to ensure
water is not siphoned back into the AP
CONTENTS
AP-3-KIT
Summary of Contents for AP-IS-KIT
Page 1: ...AQUARIUM AIR PUMP INSTRUCTION MANUAL...
Page 2: ...AP IS KIT APO KIT...
