17
Step 3.
The
Connect To
screen will appear as below. Pull down
the
Connect using
and choose the COM port that the
Switch has been connected to, then press
OK
.
Figure 8. Connect To
Step 4.
Make sure the Switch serial port parameters have been
set as per the factory default settings (Figure 9). Click
OK
to configure the Switch.
Figure 9. Port Settings
Summary of Contents for NS-16T01FS
Page 1: ...NS 16T01FS 16 Port 10 100Mbps Fast Ethernet Smart Switch User s Guide...
Page 2: ......
Page 8: ......
