AMS Quick Install Guide
21
5. Making Network Connections
Connecting Network Devices
The APS Series switches are designed to be connected to 10, 100 or 1000Mbps network cards in PCs
and servers, as well as to other switches and hubs. It may also be connected to remote devices using
optional SFP transceivers.
Twisted-Pair Guidelines
Each device requires an unshielded twisted-pair (UTP) or shielded twisted-pair (STP) cable with RJ-45
connectors at both ends. Use Category 5, 5e or 6 cable for 1000BASE-T connections, Category 5 or
better for 100BASE-TX connections.
Cabling Guidelines
The RJ-45 ports on the switch support automatic MDI/MDI-X pin out configuration, so you can use
standard straight-through twisted-pair cables to connect to any other network device (PCs, servers,
switches, routers, or hubs).
See Appendix B for further information on cabling.
CAUTION:
Do not plug a phone jack connector into an RJ-45 port. This
will damage the switch. Use only twisted-pair cables with RJ-45
connectors that conform to FCC standards.
