![background image](http://html1.mh-extra.com/html/allo-com/shield-stm/shield-stm_user-manual_2903749008.webp)
STM – Initial Setup
4
User Manual v1.0
www.shield.com
2. Initial Setup & Configuration
1. Unpack the items from the box
2. Check that you have all the items listed in the package content.
3. Connect the appliance to the power socket using the USB power cable.
4. Connect the LAN port of the STM to the PBX/VOIP Gateway.
5. Connect the WAN port of the STM to the untrusted/public network.
6. The device will take about a minute to come up & will be fully functional with the
default configuration.
Note:
Some of the PBX/Gateway devices may have an exclusive LAN/Mgmt Interface for device
management purpose other than the Data Interface (also referred as WAN/Public Interface).
In such cases LAN port of the STM should be connected to the Data Interface (aka
WAN/Public Interface).
The device operates as transparent bridging firewall with Deep Packet Inspection enabled
on the SIP traffic. By default, the appliance has been made to acquire the IP Address via
DHCP.
The device has been made to be fully functional with the default configuration. However if
the user needs to tune the device settings & the DPI policies, user can tune the configuration
via the Device WebUI.
Important Note
:
a) We strongly recommend you to change the Nano2PBX Admin Password from Factory
default to Alpha numeric password to reduce the possibility of a security breach.
b) Use Mozilla Firefox Only!
c) Bootup process of the Nano2PBX takes about 3-4 mins
2.2. Default Configuration
The device operates as transparent bridging firewall with Deep Packet Inspection enabled
on the SIP traffic. By default, the appliance has been made to acquire the IP Address via
DHCP.
The device has been made to be fully functional with the default configuration. However if
the user needs to tune the device settings & the DPI policies, He/She can tune the
configuration via the Device WebUI.
Summary of Contents for Shield STM
Page 1: ......
Page 2: ...User Manual Shield STM Appliance 1 0 Version 1 0 ...