2
nd
Generation E1/T1 PRI Card Installation
4
Quick Installation Guide v1.0 www.cem-solution.net
Hardware Setup
1) Customization of the Second gen PRI card to use in PCI / PCIe server slot.
2) Insert the Second Gen 4 port PRI (PCI/PCIe) card in the corresponding PCI/PCIe slot
of the Server.
3) Check if the installed PRI card is detected using the below command
# lspci
If the card has been recognized, it will be displayed in the output information.
Note:
If the PRI card is not recognized by the system, you have to power off and
take out the card, and then insert it into another PCI-E slot.
Summary of Contents for 2nd Gen E1/T1/J1
Page 1: ......