![background image](http://html1.mh-extra.com/html/allo-com/2acp8e-series/2acp8e-series_quick-installation-manual_2903744011.webp)
8 Port PRI Card- Quick Installation Guide
www.allo.com
Version 2.1 11
(i) Add “
allo4xxp
” at the end of /etc/dahdi/modules, so that while starting dahdi driver Allo
card modules will load automatically
(ii) Add “options
allo4xxp default_linemode=t1
# for T1 Signaling” at the end of
/etc/modprobe.d/dahdi.conf
4. Hardware Setup
2
nd
Generation 8 port PRI Card with Dongle Splits
1) Insert the 2
nd
Gen 8 port PRI (PCIe) card in the corresponding PCIe slot of the Server.
2) Check if the installed PRI card is detected using the below command
# lspci
If the card has been recognized, it will be displayed in the output information.
root voiptest ~]# lspci
#04:00.0 Non-VGA unclassified device: Device
1d21:1280(rev 01)
Device PRI Id
Type of PRI Card
1280
8 ports PRI Card