ALLNIC AUDIO T-2000, Owner'S Manual

Page: 7 / 17

7
CLEANING
A. Chassis and glass/plastic
Use only a soft, lint-free cloth, dampened slightly with water only (NO cleaning fluids!), to clean the
faceplate, chassis and tube chimneys of the T-2000 30th Anniversary .
B. Connectors
You may use any good quality contact cleaner recommended for such applications to clean the contacts
from time to time, as you deem appropriate.
INITIAL SET-UP
A. LOCATION, LOCATION, LOCATION
Like all audio products using tubes, the Allnic Audio T-2000 30th Anniversary needs to be placed on a
solid stand in a location that provides good air circulation around, above and below the stereo amplifier.
•
DO NOT cover the top of the T-2000 30th Anniversary .
•
DO NOT place the unit on carpet or foam.
•
DO NOT subject the unit to knocks and shocks as you move it around. This advice is meant
particularly for those who may want to place the T-2000 30th Anniversary on some kind of after-
market isolation feet or similar devices. Dropping one side of the T-2000 30th Anniversary , or the
whole of the unit may cause damage and may void warranty.
•
DO NOT place the unit near a strong light or heat source.
•
DO NOT place anything heavy on the unit.
•
DO NOT allow rubber or vinyl materials to rest on the chassis for long periods of time. This could
discolour the metal.
•
DO place the unit on a shelf or stand that is stable and not subject to vibration or sudden shock.
•
DO consider using a high quality power cord, inter-connects and speaker cables. The T-2000 30th
Anniversary is a highly sensitive piece of electronic designed for neutrality and will output what
you put into it. Allnic’s Zero Loss Technology cables will work synergistically with the T-2000 30th
Anniversary .
•
DO try to place T-2000 30th Anniversary away from major sources and potential receivers of RFI
and EMI. Though well shielded, the T-2000 30th Anniversary will function best away from large
power transformers and other sources of such interference and from other equipment that could
be susceptible to/sources of such forms of interference.
B. INPUTS
There are three (3) RCA type female input pairs and two (2) balanced (XLR) input pairs. Facing the rear of
the chassis, the input connections are to the right of the IEC power input. The left channel connector is the
top one in each line input pair. Please refer to Figure 5.