manualshive.com logo in svg

Allnet ALL7008, User Manual

Share
Download
Allnet ALL7008 User Manual Download Page 16

15

Administration Packet Logging:   

„

 

After enable this function; the ALL7008 will record packet which source IP or 

destination address is ALL7008. And record in Traffic Log for System 

Manager to inquire about. 

 

 

Define the required fields of Time Settings 

 

Synchronize Time/Date:

   

„

 

Synchronizing the ALL7008 with the System Clock. The administrator can 

configure the ALL7008’s date and time by either syncing to an Internet 

Network Time Server (NTP) or by syncing to your computer’s clock.   

 

GMT:  

„

 International 

Standard 

Time (Greenwich Mean Time) 

 

 

Define the required fields of Multiple Subnet 

 

Forwarding Mode:   

„

 

To display the mode that Multiple Subnet use. (NAT mode or Routing Mode) 

 

WAN Interface Address:

   

„

 

The IP address that Multiple Subnet corresponds to WAN. 

 

LAN Interface Address/Subnet Netmask:

   

„

 

The Multiple Subnet range 

Summary of Contents for ALL7008















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands