ALL168255 QIG English
ALL168255 Quick Installation Guide © 2012 ALLNET GmbH All rights reserved Page 10
Powerline function test
1. Plug the adapter into a multiple socket near your PC.
Note: If the Powerline-adapter with no network connection starts to blink, it is in standby. To
execute the test correctly, you have to unplug the adapter and immediately plug it in again. If
no LAN-cable is connected to this device, standby-mode will be activated after 60sec.
2. Install the Powerline Utility from the provided CD.
After the installation connect your PC directly to one of the 2 Powerline-Bridges.
3. Start the Software
and click on “Set” under “Main” --> “Security.
wall socket 100~240VAC
multiple mains outlet strip
network cable
