background image

Other Features and Settings 

Diagnostics 

This screen allows you to perform a "Ping" or a "DNS lookup". These activities can be useful 
in solving network problems. 

An example 

Diagnostics

 screen is shown below. 

 

Figure 103: Diagnostics Screen 

Data - Diagnostics Screen 

Ping 

Ping This IP 
Address 

Enter the IP address you wish to ping. The IP address can be on your 
LAN, or on the Internet. Note that if the address is on the Internet, 
and no connection currently exists, you could get a "Timeout" error. 
In that case, wait a few seconds and try again. 

Ping Button 

After entering the IP address, click this button to start the "Ping" 
procedure. The results will be displayed in the 

Ping Result

 pane. 

DNS Lookup 

Domain 
Name/URL 

Enter the Domain name or URL for which you want a DNS (Domain 
Name Server) lookup. Note that if the address in on the Internet, and 
no connection currently exists, you could get a "Timeout" error. In 
that case, wait a few seconds and try again. 

121 

Summary of Contents for ALL1295VPN










































































































































Reviews: