Allnet ALL1295VPN User Manual Download

Page: 123 / 137

Chapter 10

Other Features & Settings

This Chapter explains the screens and settings available via the "Other"
menu.

Overview

Normally, it is not necessary to use these screens, or change any settings. These screens and
settings are provided to deal with non-standard situations, or to provide additional options for
advanced users.

The screens available are:

Diagnostics

Ping, DNS Lookup.

Password

Only required if your LAN has other Routers or Gateways.

Web Manage-
ment

This feature allows you to manage the Dual WAN Broadband VPN
Router via the Internet.

Firmware Up-
grade

The firmware (software) in the Dual WAN Broadband VPN Router
can be upgraded using your Web Browser.

Backup/Restore

Backup or restore the configuration file for the Dual WAN Broadband
VPN Router. This file contains all the configuration data.

120

Summary of Contents for ALL1295VPN










































































































































Search results

Summary of Contents for ALL1295VPN

Reviews:

Related manuals for ALL1295VPN

Brands by name

Popular brands

Allnet ALL1295VPN, User Manual

Search results

Summary of Contents for ALL1295VPN

Reviews:

Related manuals for ALL1295VPN

Brands by name

Popular brands