ALL02860ND Quick Installtion Guide
© ALLNET GmbH München 2013 - Alle Rechte vorbehalten
Subnet Mask address as
255.255.255.0
. (Select
Use the following IP Address
radio button).
Once the computer has been prepared, proceed to setting up the ALL02860ND.
ALL02860ND Setup
1)
To configure ALL02860ND, open a web browser (
example:
Microsoft Internet Explorer, Mozilla
Firefox, Google Chrome, etc.).
2)
In the address bar of the web browser, enter
192.168.1.1
(the default IP address of the
ALL02860ND)
and hit enter.
3)
A login screen will appear. By default, the username of the ALL02860ND is
admin
and the
password is
admin
. Enter the current username and password of the ALL02860ND and then
click
Login
. Refer to the ALL02860ND user manual on how to change the username and
password.
4)
After clicking
Login
with the correct username and
password, the ALL02860ND Main Menu will appear. If
you are successful, proceed to setting up the wireless
connection.
Switching Between Operating Modes
This device can operate in the following modes: Access Point, WDS AP, WDS Bridge and Repeater.
A.
Click on the
Operation Mode
link under the
System
navigation drop-down menu.
B.
Operating Mode
: Select an operating mode from the list (Access Point, WDS AP, WDS
Bridge or Repeater) and then click on the
Apply
button.
C.
All basic setup is completed.
Note: The wireless connection is not secure. To setup security on
the ALL02860ND, refer to the ALL02860ND User Manual.
http://192.168.1.1
