manualshive.com logo in svg

Allnet ALL0258N, User Manual

Share
Download
Allnet ALL0258N User Manual Download Page 7

Chapter 1 Product Overview   

Thank you for choosing ALL0258N. The ALL0258N is a long range, high

‐

performance IEEE 802.11b/g/n network 

solution that provides Access Point, Client Bridge, WDS, and Client Router functions in a single device.   

In addition to providing the latest wireless technology, the ALL0258N supports Power over Ethernet and Power 

by Adapter capabilities, which allow the device to be installed easily in nearly any indoor or outdoor location. 

Advanced features include power level control, narrow bandwidth selection, traffic shaping, and Real

‐

time RSSI 

indication.   

A variety of security features help to protect your data and privacy while you are online. Security features include 

Wi

‐

Fi Protected Access (WPA

‐

PSK/WPA2

‐

PSK), 64/128/152

‐

bit WEP Encryption, and IEEE 802.1x with 

RADIUS.   

1.1 Feature   

The following list summarizes the key features of the ALL0258N: 

-

High-speed data rates up to 150 Mbps make 

the ALL0258N ideally suited for handling heavy data payloads such as MPEG video streaming -High output 

power up to 26 dBm delivers superior range and coverage -Fully Interoperable with IEEE 802.11b/IEEE 

802.11g/IEEE 802.11n-compliant devices -Multi-function capabilities enable users to use different modes in 

various environments -Point-to-point and point-to-multipoint wireless connectivity enable data transfers between 

two or more buildings -Channel bandwidth selection allows the appropriate bandwidth to be used to reach 

various distances -RSSI indicator makes it easy to select the best signal for Access Point connections 

Power-over-Ethernet capabilities allow for flexible installation locations and cost savings -Four SSIDs let clients 

access different networks through a single Access Point, and assign different policies and functions for each 

SSID -WPA2/WPA/ WEP/ IEEE 802.1x support and MAC address filtering ensure secure network connections 

-PPPoE/PPTP function support make it easy to access the Internet via Internet Service Provider (ISP) service   

authentication -SNMP Remote Configuration Management helps administrators remotely configure or manage 

the Access Point -QoS (WMM) support enhances performance and user experiences   

Summary of Contents for ALL0258N





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands