Allnet ALL0258 User Manual Download

Page: 42 / 65

6 Client Router Operating Mode

6.1 Logging

To configure the device through the web-browser, enter the IP address of

the device (default:

192.168.1.1

) into the address bar of the web-browser

and press

Enter

Make sure that the device and your computers are configured on the

same subnet. Refer to

Chapter 2

in order to configure the IP address of

your computer.

After connecting to the IP address, the web-browser will display the login

page.

Specify

admin

for both the user name and password.

After logging in you will graphical user interface (GUI) of the device. The

navigation drop-down menu on left is divided into four sections:

Status

: Displays the overall status, connection status, and event log.

System

: This menu includes the system properties, IP and Spanning

Tree settings.

Router

: This includes WAN, LAN, and VPN settings.

Wireless

: This menu includes status, basic, advanced, and security.

Management

: This menu includes the admin setup, SNMP, firmware

upgrade, and save/restore backup.

Summary of Contents for ALL0258


































































Search results

Summary of Contents for ALL0258

Reviews:

Related manuals for ALL0258

Brands by name

Popular brands

Allnet ALL0258, User Manual

Search results

Summary of Contents for ALL0258

Reviews:

Related manuals for ALL0258

Brands by name

Popular brands