Wireless-N USB Dongle User Guide
PIN Code
Enter the PIN code displayed in the following field to the WPS
screen of the access point. When STA is Enrollee, you can use
"Renew" button to re-generate new PIN Code.
Config Mode
Our station role-playing as an
Enrollee
or an external
Registrar.
Detail
Information about Security and Key in the credential.
Connect
Click this button to connect to the selected network inside creden-
tials.
Rotate
Click this button to rotate to connect to the next network inside
credentials.
Disconnect
Click this to stop WPS action and disconnect this active link. And
then select the last profile at the Profile Page of utility if exist. If
there is an empty profile page, the driver will select any non-
security AP.
Export Profile
Export all credentials to Profile.
Delete
Click to Delete an existing credential. And then select the next
credential if exist. If there is an empty credential, the driver will
select any non-security AP.
PIN
Start to add to Registrar using PIN configuration method. If STA
Registrar, remember that enter PIN Code read from your Enrollee
before starting PIN.
PBC
Start to add to AP using PBC configuration method.
WPS associate IE
Send the association request with WPS IE during WPS setup. It is
optional for STA.
WPS Probe IE
Send the probe request with WPS IE during WPS setup. It is
optional for STA.
Progress Bar
Display rate of progress from Start to Connected status.
Status Bar
Display currently WPS Status.
24
