Allnet ALL-WAP0558N User Manual Download Page 9

Page: 9 / 96

ALL-WAP0558N

User’s

Manual

1.3 Package Contents

Open the package carefully, and make sure that none of the items listed below are missing.
Do not discard the packing materials; in case of return, the unit must be shipped in its original
packaging.



(1)

Wireless Access Point / Client Bridge (ALL-WAP0558N)



(1)

24V/1.0A Power Adapter



(1)

PoE Injector (EPE-24R)



(1)

Mounting Kit with Mast-Mount Strap Special Screw Set



(1)

QIG



(1)

CD (User Manual)

Using a power adapter other than the one included with the

ALL-WAP0558N may cause damage to the device.

1.4 System Requirement

The following conditions are the minimum system requirements.



A computer with an Ethernet interface and operating under Windows XP, Vista, 7 or
Linux.



An Internet browser that supports HTTP and JavaScript.

1.5 Hardware Overview

Physical Interface

- 1 x 10/100 LAN Port with PoE support
- 1 x 10/100 LAN port
- 1 x Reset button

Maximum Wireless Data rate

- 300 Mbps

LEDs status

- Power Status
- LAN (10/100Mbps)

Summary of Contents for ALL-WAP0558N

































































































Search results

Summary of Contents for ALL-WAP0558N

Reviews:

Brands by name

Popular brands

Allnet ALL-WAP0558N, User Manual

Search results

Summary of Contents for ALL-WAP0558N

Reviews:

Brands by name

Popular brands