Allnet ALL-WAP0558N User Manual Download Page 54

Page: 54 / 96

ALL-WAP0558N

User’s

Manual

Accept does not apply the changes – you must go to Status -> Save / Load

to apply the new settings. Please refer to Chapter 4.1 for more information.

The MAC address of the AP that you would like to extend the wireless coverage

of must be entered. Not all Access Points supports this feature.

8 LAN Setup

This section will guide you to setup the Local Area Network (LAN) settings

8.1 IP Settings

This section is only available for

Non-Router Mode

. IP Settings allows you to configure the IP

settings of the ALL-WAP0558N.

IP Network Setting

Select Radio button for

Obtain an IP address automatically

Specify an IP address

IP Address

Specify LAN port IP address.

IP Suet Mask

Specify Subnet Mask.

Summary of Contents for ALL-WAP0558N

































































































Search results

Summary of Contents for ALL-WAP0558N

Reviews:

Related manuals for ALL-WAP0558N

Brands by name

Popular brands

Allnet ALL-WAP0558N, User Manual

Search results

Summary of Contents for ALL-WAP0558N

Reviews:

Related manuals for ALL-WAP0558N

Brands by name

Popular brands