Allnet ALL-CAM2305-LW User Manual Download Page 58

Page: 58 / 132

Irrtum und Änderungen vorbehalten

If you already had a certificate installed, the Create Self-signed

Certificate is grayed out.



Create the authorized certificate

Click

Create

button to create the certificate request.

Download the certificate request and submit it to the trusted

certificate authority for signature.

After receiving the signed valid certificate, import the certificate to

the device.

There will be the certificate information after you successfully create

and install the certificate.

Figure 6-23

Installed Certificate

Click the

Save

button to save the settings.

6.4

Configuring Video and Audio Settings

6.4.1

Configuring Video Settings

Steps:

Enter the Video Settings interface:

Configuration >Basic Configuration >

Video / Audio > Video

Configuration > Advanced Configuration >

Video / Audio >

Video

Summary of Contents for ALL-CAM2305-LW


































































































































Search results

Summary of Contents for ALL-CAM2305-LW

Reviews:

Related manuals for ALL-CAM2305-LW

Brands by name

Popular brands

Allnet ALL-CAM2305-LW, User Manual

Search results

Summary of Contents for ALL-CAM2305-LW

Reviews:

Related manuals for ALL-CAM2305-LW

Brands by name

Popular brands