Allnet ALL-CAM2305-LW User Manual Download Page 111

Page: 111 / 132

Irrtum und Änderungen vorbehalten

111

Figure 9-14

Import/Export Configuration File

9.7.4

Upgrading the System

Steps:

Enter the Maintenance interface: Configuration > Basic

Configuration> System > Maintenance , or Configuration > Advanced

Configuration> System > Maintenance

Select firmware or firmware directory to locate the upgrade file.

Firmware: Locate the exact path of the upgrade file.

Firmware Directory: Only the directory the upgrade file belongs to is

required.

Click

Browse

to select the local upgrade file and then click

Upgrade

to start remote upgrade.

Figure 9-15

Remote Upgrade

Note:

The upgrading process will take 1~10 minutes. Please don't disconnect

power of the camera during the process, and the camera reboots

automatically after upgrade.

9.8

RS-232 Settings

The RS-232 port can be used in two ways:

Summary of Contents for ALL-CAM2305-LW


































































































































Search results

Summary of Contents for ALL-CAM2305-LW

Reviews:

Related manuals for ALL-CAM2305-LW

Brands by name

Popular brands

Allnet ALL-CAM2305-LW, User Manual

Search results

Summary of Contents for ALL-CAM2305-LW

Reviews:

Related manuals for ALL-CAM2305-LW

Brands by name

Popular brands