• Setting the internal clock.
CAUTION: Changing the date has a direct influence on
the fixed date function!
• Setting the billing month (fixed date month).
• Setting the meter Customer serial number.
• Activating / deactivating the radio encryption.
• Setting an inductive password.
• Resetting / deleting alarms and registers:
- Removal / tamper alarm
- Monthly history
- Reverse flow register
- End-of-year indexes
You can find more precise information in the user´s
manual or the EquaScan software.
MODULE PARAMETERS
The following specific parameters related to the pulse meter are possible: Other general functional parameters from
EquaScan pulse meter RF module are possible:
All external circuits must be SELV (Safety Extra Low Voltage) and be with limited Power Source following chapter 2.2 of
IEC60950-1:2005+/A1:2010 and 2.5 of EN60950-1:2006+/A11:2009+/A1:2010+/A12:2011. All in- and outputs should be
connected on potential-free contacts suitable for dry circuits.
Connection Wires: The wire section of the individual contact is AWG24 or 0.2 mm
2
.
Electrical signals of the pMIU
RF
Wire color
Marking on the Device
Signal description
Black
GND
Ground (0V)
Green
TAMP
Cable cut tampering signal & pMIU
RF
activation of RF system when con-
nected to GND (0V) of meter
Yellow
DIR/DATA
pMIU
RF
pulse input : Signal for the Flow Direction/Data (logic high =
forward) or useable as a secondary pMIURF pulse input ( e.g.: CF Echo
for Rep-Volume)
Red
REED VCC
pMIU
RF
pulse input : Type «Reed switch»
White
OPEN COLLECTOR
pMIU
RF
pulse input : Type «Open Collector» (solid state)
Brown
GND
Ground (0V)
Meter w. Reed Switch
CF Echo Rep E/V
Cyble sensors (3 wires)
GND
OPEN Collector
(input 1 statistic)
REED
(input 1 reed)
DIR
TAMP
GND
GND
OPEN Collector
(input 1 statistic)
REED
(input 1 reed)
DIR
TAMP
GND
GND
OPEN Collector
(input 1 statistic)
REED
(input 1 reed)
DIR
TAMP
GND
GND
OPEN Collector
(input 1 statistic)
REED
(input 1 reed)
DIR
TAMP
GND
GND
OPEN Collector
(input 1 statistic)
REED
(input 1 reed)
DIR
TAMP
GND
GND
OPEN Collector
(input 1 statistic)
REED
(input 1 reed)
DIR
TAMP
GND
Gas, Electric Meter w. P0 Interface
Cyble sensor (2 wires)
Cyble sensor (5 wires)
Reed Switch
GND - E / 16
REP E / 17
REP V / 19
GND - V / 18
GND
Out LF
TAMP
GND
Out LF
GND
Out LF
DIR
TAMP
P0 Signal
GND - Reed
GND -
P0 Interf.
