Allmand TLB 220, Operator'S Manual

Page: 3 / 51

3
INTRODUCTION
This manual provides information necessary for the safe operation of the Allmand TLB.
The Allmand TLB standard configuration is powered by a gasoline engine connected to
hydrostatic pumps that drive hydraulic motors and cylinders that move the machine. Time
should be taken to understand the controls and movement of this equipment.
Specific operating instructions and specifications are contained in this publication to familiar-
ize the operator and maintenance personnel with the correct and safe procedures necessary
to maintain and operate the equipment.
Take time to read this book thoroughly. If you are uncertain about any of the information pre-
sented in the manual, contact the factory by phone at
800-562-1373 or by fax at 308-995-5887
or contact your dealer, for clarification before operation.
SAFETY SYMBOLS
The purpose of the SAFETY INFORMATION SYMBOL shown below is to attract your special
attention to safety related information contained in the text.
FAILURE TO UNDERSTAND AND COMPLY WITH SAFETY RELATED INFORMA-
TIONAL INSTRUCTIONS MAY RESULT IN INJURY TO OPERATOR OR OTHERS. IF
YOU DO NOT UNDERSTAND ANY PART OF THIS INFORMATION CONTACT YOUR
DEALER FOR CLARIFICATION PRIOR TO OPERATING EQUIPMENT.
NOTE
The word NOTE is used to bring your attention to supplementary information in relation to
various aspects of proper operation and maintenance.
NOTE: Keep this manual accessible during operation to provide convenient reference.
NOTE: Any reference in this manual to LEFT or RIGHT shall be determined by looking for-
ward while sitting in the operator’s seat.
DANGER
WARNING
CAUTION
Not
for
Reproduction