19a
BB
725 Relay 2
BB
725 Relay 1
CC
725 Relay
Connection Detail
19b
BB
725 Relay 2
725 Relay 1
CC
23. On Zettler light relay 2 disconnect the remaining 16
AWG wire (
DD
, Figure 20) from the DC power spade.
This wire should be leading from the divider panel of
the component block. On Zettler relay 1 disconnect
the 16 AWG wire from the same spade.
24.
Cut off and discard the female spade terminal from
the wire that was connected to the Zettler relay. Strip
off the appropriate amount of wire insulation and install
wire (
EE
, Figure 21) into a 3 pin lever lock (
FF
, Figure
21, Ref. 10) from the kit contents.
Zettler Relay
Disconnection Detail
20
DD
Zettler Relay 2
21
EE
FF
8
www.allmand.com
25. From the kit contents, locate and select they yellow 16
AWG wire (
GG
, Figure 22, Ref. 3). Cut the yellow 16
AWG wire in half, and strip the ends of the cut wires.
On each of the cut wires crimp a blue fork terminal
(
HH
, Figure 22, Ref. 8) on one of the ends.
Not for
Reproduction
