5
WI-LSC905/3003-02
PROGRAMMING INSTRUCTIONS
FOR OPTIONAL ALLMAND LSC100 TIMER
The Allmand
LSC100 Light Sequence Commander
can be equipped with an optional 7 Day, 8 Event, program-
mable timer.
OVERVIEW
The LSC Timer allows full ON/OFF control of the LSC equipped light tower. The lights can be turned ON and
OFF at specific times of the day and as many as 8 times a day. The timer can also be programmed for a
specific day of the week or any combination of days.
SETTING TIME
To set the clock to your local time and the day of the week:
1. Press the
CLOCK
button and hold throughout the following steps.
2. Set the Day of the Week by pressing the
DAY
key until the correct day appears.
3. Set the
HOUR
by pressing
the
HOUR
key until the desired
Hour
appears.
4. Set
MINUTE
by pressing the
MIN
key until the desired minute appears.
5. When the time and day is set, release the
CLOCK
key.
PROGRAMMING
1. Pressing the
TIMER
key will enter the Program mode. Pressing the
TIMER
key will scroll through the
events. Stop on the event you want to set. There are 8 events and an ON and OFF time for each
event.
2. Press
DAY
key to select the day or group of days. Press the
HOUR
key to set the hour and the
MIN
key to set the minute.
NOTE:
You may never need to use more than 1 event ON and OFF per day. However the timer is capable of
8 event pairs per day. Always set an
OFF
time for each
ON
time.
NOTE:
To clear the event, press the
TIMER
key until you get to the event you want to clear and hold, then
press the
DAY
key until the setting clears.
Always set an
OFF
time for each
ON
time. It is possible to have one
OFF
event for several
ON
events. For
example, if you want to have the lights come on at different times each day but go off at the same time every
day,one
OFF
event is all that is needed as long as it covers all of the
ON
days.
When the programming is complete, press the
CLOCK
key.
The
MANUAL
key on the timer will select
ON
,
AUTO
, and
OFF
. Position the black bar in the display window
over the desired function.
For Automatic operation of the timer it must be set to AUTO
.
With the LSC set with Power Switch
ON
and the AUTO/MANUAL switch to
AUTO
, the
MANUAL TIMER
key
can be used to initiate the start
sequence by pressing the
MANUAL
key until it indicates
ON
. The shutdown
sequence can also be initiated by pressing the
MANUAL
key to indicate the
OFF
position.
All programming and time can be reset to new settings by pushing the
RESET
button with a pencil or pen.
NOTE:
All programming will be lost when button is pushed
Not
for
Reproduction
