10
Resetting Prognostics
Oil Life Monitor
For either a
pushbutton
or
bump lever shift selector
, press
and hold the
MODE
button for approximately 10 seconds
while in Oil Life Monitor mode .
Or
For either a
pushbutton
or
bump lever shift selector
,
perform the following shift sequence with the ignition
on, but the engine off . Do not stop the sequence
for more than three seconds once you have started .
N-D-N-D-N-R-N
Filter Life Monitor
For either a
pushbutton
or
bump lever shift selector
, press
and hold the MODE button for approximately 10 seconds
while in Filter Life Monitor mode .
Or
For either a
pushbutton
or
bump lever shift selector
, perform the
following shift sequence with the ignition on, but the engine off .
Do not stop the sequence for more than three seconds once you
have started .
N-R-N-R-N-D-N
Transmission Health Monitor
This must be reset manually using Allison DOC
®
for PC diagnostic
program after correcting a clutch system issue .
Exit Prognostics
For a
pushbutton
shift selector
, press the
N (NEUTRAL)
range button .
For a
bump lever
shift selector
, press the
DIAGNOSTICS
range button until back to range display .
