iv
Copyright © 2004 General Motors Corp.
LIST OF WARNINGS
This manual contains the following Warnings —
IT IS YOUR RESPONSIBILITY TO BE FAMILIAR WITH ALL OF THEM.
Operation with excessive loads can cause transmission damage and unexpected vehicle movement.
To help avoid injury, property damage, and/or transmission damage, do not exceed 11 800 kg
(26,000 lbs) GCW or the OEM vehicle rating, whichever is less.
If ignition is turned “OFF” and then “ON” while the CHECK TRANS light is displayed, the
transmission may remain in neutral until the code is cleared. Leave ignition “ON” until you are in
a safe place to stop.
For vehicles containing 1000 and 2000 Product Families transmissions with park pawl, each time
you park the vehicle or leave the operator’s station with the engine running, do the following.
• Bring the vehicle to a complete stop using the service brake.
• Make sure the engine is at low idle rpm.
• Put the transmission in P (Park).
• Engage the P (Park) range by slowly releasing the service brake.
• Apply the emergency brake and/or parking brake, if present, and make sure it is properly
engaged.
• If the operator’s station will be unoccupied with the engine running, chock the wheels and
take any other steps necessary to keep the vehicle from moving.
If this procedure is not followed, the vehicle can move suddenly and you or others could be injured.
For vehicles containing 2000 Product Family transmissions with auto-apply parking brakes, each
time you park the vehicle or leave the operator’s station with the engine running, do the following.
• Bring the vehicle to a complete stop using the service brake.
• Make sure the engine is at low idle rpm.
• Put the transmission in PB (Auto-Apply Parking Brake). Make sure that the parking brake is
properly engaged.
• Apply the emergency brake, if present, and make sure it is properly engaged.
• If the operator’s station will be unoccupied with the engine running, chock the wheels and
take any other steps necessary to keep the vehicle from moving.
If this procedure is not followed, the vehicle can move suddenly and you or others could be injured.
For vehicles containing 2000 Product Family transmissions without auto-apply parking brakes,
each time you park the vehicle or leave the operator’s station with the engine running, do the
following.
• Bring the vehicle to a complete stop using the service brake.
• Make sure the engine is at low idle rpm.
• Put the transmission in N (Neutral).
• Apply the emergency brake and/or parking brake and make sure they are properly engaged.
• If the operator’s station will be unoccupied with the engine running, chock the wheels and
take any other steps necessary to keep the vehicle from moving.
If this procedure is not followed, the vehicle can move suddenly and you or others could be injured.
Observe safety precautions during hydraulic pressure check procedures. All personnel must stand
clear of the vehicle. Take precautions against movement of the vehicle. Be sure that gauges
(vacuum, pressure, tachometer) have extended lines so that they can be read from inside the
vehicle.
Summary of Contents for 1000 EVS
Page 26: ......
