GC655Technical Manual
Page 12
Gigabit Ethernet Setup for Windows
o
Install network card in computer.
o
Boot the PC and cancel the “Found new Hardware Wizard” window that may appear when
Windows detects the new card.
o
Install the driver that came with the network card.
o
Once the driver is installed, open the Network Connections Dialog as follows: From the
Windows desktop select
start
, then select
Control Panel
, then double click on the
Network
Connections
icon. Double click the relevant network card listed or right-click the relevant
network card and select
Properties
. This will open the properties window for your network
card. See
Figure 5
.
Figure 5. Network card main properties window.
