SECTION 2.0
OVERVIEW
The Allied AutoLube III Lubrication Sys-
tem (AutoLube III) is designed to provide a
simple and effective, inexpensive method
of lubricating hydraulic hammers.
The AutoLube III is a fully automated sys-
tem with lubricant supplied by a hydraulic
pump. The AutoLube III is installed and
works integrally with the carrier and ham-
mer, pumping lubricant to the hammer
bushings and demolition tool every time
the hammer is activated. Costly downtime
is eliminated because the right amount of
lubricant is delivered at the right time. The
Allied AutoLube III is the proven solution
for lubricating hydraulic hammers.
The Allied AutoLube III Lubrication Sys-
tem provides the following advantages:
·
Simple design
·
Compact size - mounts on hammer.
·
Supplied with all mounting hardware
and adapter fittings.
·
Replaceable or refillable, standard 12
ounce grease cartridge. Bulk filling of
cartridge canbe complete
·
No tools required to change grease
cartridge.
·
Primer releif valve.
·
Adjustable output by changing meter-
ing plug.
·
Used with Allied Chisel Paste.
·
Lubricant level can be monitored from
operator’s cab.
Figure 2-1 illustrates the AutoLube III
main components and Figure 2-2 shows
t y p i c a l m o u n t i n g l o c a t i o n s o f t h e
AutoLube III on a hammer. The mounting
location varies with the hammer model.
A
llied
AutoLube III
11-11-02
3
PUMP
HOUSING
GREASE
Figure 2-1. AutoLube III Main Components
Figure 2-2. Typical AutoLube III Mounting
