Allied 5500, Technical Manual, Page: 34 / 68

b. Hold the Valve Stem (8) across its
flats with a 2-3/4-inch open-end
wrench. Refer to Figure 8-17.
c. Use a 3-inch open-end wrench to
loosen the Hose Adapter (15) on the
Valve Stem (8).
d. By hand thread the Hose Socket (15)
from the Valve Stem (8) as shown in
Figure 8-18.
2. Thread the Valve Stem (8) and its as-
sembled components out of the Valve
Body Nut (12) and End Cap (10), as
shown in Figure 8-19.
3. Refer to Figure 8-20. Inspect the Hose
Socket Timing Pin for damage and cor-
rect height. The Timing Pin should ex-
tend 1/4-inch from the Hose Socket (15).
4. DO NOT remove the Timing Pin from
the Hose Socket (15). If either the Tim-
ing Pin or Hose Socket must be replaced,
replace the complete assembly.
A
LLIED Model 5500 Hole-Hog
24 08/25/00
Secure End Cap in Vice
with Padded Jaws.
Remove Valve Stem and Valve
Thread Valve Stem
Counterclockwise
OUT of End Cap.
Figure 8-19. Thread the Valve Stem From the
Valve Body Nut and End Cap.
Hex Head
Cap Screw
Hose Adapter
1/2” Open End
Wrench
Figure 8-16. Loosen Hex Head Cap Screw.
Hose Socket
Timing Pin
0.25 inch
Figure 8-20. Inspect Hose Socket.
Secure End Cap in Vise
with Padded Jaws.
Apply 3-inch Open
End Wrench across
flats of Hose Socket.
Apply 2-3/4-inch Open
End Wrench across
flats of Valve Stem.
Figure 8-17. Loosen the Hose Adapter on the
Valve Stem.
Secure End Cap in Vise
with Padded Jaws.
Hex Head
Cap Screw
Hose Adapter
End Cap
Valve Components
Figure 8-18.Remove Hose Adapter from the
Valve Stem