Allied 495, Operator And Parts Manual, Page: 17 / 38

17
Operation - 495 & S495 Loader
Removing the Loader from Your Tractor
WARNING
When removing the loader, it must be fitted with a bucket or other
suitable attachment to give the frame stability after removal. If
this is not done, the frame will not remain standing.
WARNING
Always remove the loader on firm, level ground (away from
children's play area and high traffic areas). This makes attaching
and removing much faster and easier. It also makes the free
standing loader more stable.
1. Raise the loader, lower support stand tubes and lock into position.
2. Lower the loader until the stand tubes are firmly on the ground and then dump the bucket so
that it is also firmly on the ground. there should be slight downward pressure.
3. Loosen the bolts from the rear of the subframe boots and swing bolt up into lock position.