Allied Vision Alvium 1500 C-050 User Manual Download Page 77

Page: 77 / 80

Camera interfaces

Alvium CSI-2 Cameras User Guide V1.1.0

Status LED

Alvium CSI-2 cameras have a green status LED. The following tables describe the
flashing pattern indicating different events. Inverse flashing: If an LED is already on,
it is switched off for a short time.

LED codes

Error conditions

4 short flashes followed by another sequence indicates errors. In this case, try the
following to get the camera back to normal operation:
•

Restart the camera.

•

Should this fail, recover the firmware. See

Firmware update

on page 79.

•

Should this fail, please contact

[email protected]

LED codes

Behavior

Status

Continuously active

Power on/idle state

Irregular flashing

Command or image traffic,
such as for camera startup

4 short flashes

Error state

Table 34: LED codes for normal operation

LED codes for firmware update

For LED codes signaling a firmware update, see

Firmware update

on page 79.

Summary of Contents for Alvium 1500 C-050

















































































Search results

Summary of Contents for Alvium 1500 C-050

Reviews:

Related manuals for Alvium 1500 C-050

Brands by name

Popular brands

Allied Vision Alvium 1500 C-050, User Manual

Search results

Summary of Contents for Alvium 1500 C-050

Reviews:

Related manuals for Alvium 1500 C-050

Brands by name

Popular brands